Hochtemperatur-Calciumsilikat-Isolierung konstruiert für Kraftwerk boilers, steam pipes, turbine housings, economizers, and flue gas ducts. Maximale Energieeffizienz, reduzierter Wärmeverlust und zuverlässiger langfristiger Wärmeschutz.
Power generation facilities — including coal-fired, gas-fired, biomass, and waste-to-energy plants — operate with steam temperatures reaching 600°C and combustion chambers exceeding 1000°C. Efficient thermal insulation is essential to minimize heat losses, maximize turbine efficiency, and protect personnel from hot surfaces.
HR RHINO Calciumsilikatplatten liefern exceptional thermal Leistung across the entire Kraftwerk system — from boiler walls and superheater sections to steam pipes, turbine casings, and flue gas ducts. Our products reduce energy loss, lower fuel consumption, and extend equipment service life.
Based on Xonotlit (6CaO·6SiO₂·H₂O), our boards provide niedrige Wärmeleitfähigkeit, vibration resistance, excellent dimensional stability under thermal cycling, and long-term reliability — making them the preferred insulation solution für moren power stations worldwide.
Sechs kritische power generation system components where HR RHINO Calciumsilikatplatten liefern superioder thermal insulation and energy savings.
Boiler walls and combustion chambers require Hochtemperatur-Isolierung to contain heat, improve thermal efficiency, and protect structural steel. Our boards work behind refractory linings as reliable backup insulation.
High-pressure steam pipes transporting steam from boilers to turbines operate at 400-600°C. Calcium silicate insulation minimizes heat loss, ensures Energieeffizienz, and protects personnel from hot surfaces.
Superheater and reheater sections transfer heat to steam at 500-600°C. Our boards insulate headers, tube Supports, and surrounding structures to maintain optimal steam temperature.
Economizers recover heat from flue gases to preheat feedwater. Calcium silicate boards insulate economizer casings, maintaining surface temperatures within safe limits while maximizing heat recovery.
Flue gas ducts, dampers, and stack liners require thermal insulation to prevent heat loss, control acid gas condensation, and protect steel from thermal stress. Our lightweight boards are ideal für these applications.
Steam turbine casings, main steam valves, and control valves operate at 400-600°C. Our custom-shaped insulation blocks maintain efficiency and provide removable insulation für maintenance access.
Konstruiert zur Maximierung thermal efficiency and reliability in power generation applications.
Low thermal conductivity significantly reduces heat loss from boilers and steam pipes, improving overall plant efficiency and reducing fuel consumption.
Excellent mechanical strength handles continuous vibration from turbines, fans, and large rotating equipment without crumbling oder settling.
Stable under repeated startup/shutdown cycles. Linear shrinkage <1.5% at 1000°C maintains insulation integrity over decades of service.
100% non-Asbest, non-toxic. Complies with OSHA, EU REACH, and international standards. Safe für maintenance workers.
Maintains safe touchable surface temperatures on boiler and pipe exteriors, reducing burn hazards and meeting OSHA safety standards.
Leichtgewicht boards and pre-cut shapes accelerate plant shutdowns. Kundenspezifisch sizes available für retrofit and new construction Projekts.
Our most popular product für Kraftwerk applications — balancing thermal insulation, mechanical strength, and cost-effectiveness für boiler walls, steam pipes, superheaters, and flue gas ducts.
Max. Einsatztemperatur 1100°C with excellent dimensional stability and niedrige Wärmeleitfähigkeit. Ideal as primary oder backup insulation across multiple power generation systems.
Anzeigen Product Details →Optimal product selection für different Kraftwerk systems von Hochtemperatur- boilers to flue gas ducts.
Hohe Festigkeit für boiler walls and superheater areas. Compressive ≥5 MPa, max 1100°C.
Details Anzeigen →
Ideal für turbine casings, valves and superheater sections. Compressive ≥4 MPa.
Details Anzeigen →
Most versatile choice für boiler walls, steam pipes, and economizers. Max 1100°C.
Details Anzeigen →
Balanced Leistung für steam pipe insulation and moreate temperature zones.
Details Anzeigen →
Leichtgewicht option für flue gas ducts, economizers, and low-pressure applications.
Details Anzeigen →
Leichtgewicht insulation für stack liners, dampers and low-temperature applications.
Details Anzeigen →