High-temperature calcium silicate insulation engineered for power plant boilers, steam pipes, turbine housings, economizers, and flue gas ducts. Maximum energy efficiency, reduced heat loss, and reliable long-term thermal protection.
Power generation facilities — including coal-fired, gas-fired, biomass, and waste-to-energy plants — operate with steam temperatures reaching 600°C and combustion chambers exceeding 1000°C. Efficient thermal insulation is essential to minimize heat losses, maximize turbine efficiency, and protect personnel from hot surfaces.
HR RHINO calcium silicate boards deliver exceptional thermal performance across the entire power plant system — from boiler walls and superheater sections to steam pipes, turbine casings, and flue gas ducts. Our products reduce energy loss, lower fuel consumption, and extend equipment service life.
Based on xonotlite (6CaO·6SiO₂·H₂O), our boards provide low thermal conductivity, vibration resistance, excellent dimensional stability under thermal cycling, and long-term reliability — making them the preferred insulation solution for modern power stations worldwide.
Sei componenti critici di sistemi di generazione elettrica dove i pannelli HR RHINO offrono isolamento termico superiore e risparmio energetico.
Boiler walls and combustion chambers require high-temperature insulation to contain heat, improve thermal efficiency, and protect structural steel. Our boards work behind refractory linings as reliable backup insulation.
High-pressure steam pipes transporting steam from boilers to turbines operate at 400-600°C. Calcium silicate insulation minimizes heat loss, ensures energy efficiency, and protects personnel from hot surfaces.
Superheater and reheater sections transfer heat to steam at 500-600°C. Our boards insulate headers, tube supports, and surrounding structures to maintain optimal steam temperature.
Economizers recover heat from flue gases to preheat feedwater. Calcium silicate boards insulate economizer casings, maintaining surface temperatures within safe limits while maximizing heat recovery.
Flue gas ducts, dampers, and stack liners require thermal insulation to prevent heat loss, control acid gas condensation, and protect steel from thermal stress. Our lightweight boards are ideal for these applications.
Steam turbine casings, main steam valves, and control valves operate at 400-600°C. Our custom-shaped insulation blocks maintain efficiency and provide removable insulation for maintenance access.
Progettato per massimizzare efficienza termica e affidabilità in applicazioni di generazione elettrica.
Low thermal conductivity significantly reduces heat loss from boilers and steam pipes, improving overall plant efficiency and reducing fuel consumption.
Excellent mechanical strength handles continuous vibration from turbines, fans, and large rotating equipment without crumbling or settling.
Stable under repeated startup/shutdown cycles. Linear shrinkage <1.5% at 1000°C maintains insulation integrity over decades of service.
100% non-asbestos, non-toxic. Complies with OSHA, EU REACH, and international standards. Safe for maintenance workers.
Maintains safe touchable surface temperatures on boiler and pipe exteriors, reducing burn hazards and meeting OSHA safety standards.
Leggero boards and pre-cut shapes accelerate plant shutdowns. Custom sizes available for retrofit and new construction projects.
Our most popular product for power plant applications — balancing thermal insulation, mechanical strength, and cost-effectiveness for boiler walls, steam pipes, superheaters, and flue gas ducts.
Max service temperature 1100°C with excellent dimensional stability and low thermal conductivity. Ideal as primary or backup insulation across multiple power generation systems.
Vedi Dettagli Prodotto →Optimal product selection for different power plant systems from high-temperature boilers to flue gas ducts.
High strength for boiler walls and superheater areas. Compressive ≥5 MPa, max 1100°C.
Vedi Dettagli →
Ideale per turbine casings, valves and superheater sections. Compressive ≥4 MPa.
Vedi Dettagli →
Most versatile choice for boiler walls, steam pipes, and economizers. Max 1100°C.
Vedi Dettagli →
Balanced performance for steam pipe insulation and moderate temperature zones.
Vedi Dettagli →
Leggero option for flue gas ducts, economizers, and low-pressure applications.
Vedi Dettagli →
Leggero insulation for stack liners, dampers and low-temperature applications.
Vedi Dettagli →