Complete safety information for HR RHINO calcium silicate insulation boards. Prepared in accordance with GHS, OSHA HCS 2012, and EU REACH (Regulation EC 1907/2006).
This Hoja de Datos de Seguridad del Material (MSDS/SDS) applies to all calcium silicate insulation board products manufactured by Qingdao Henry Calcium Silicate Board New Materials Co., Ltd. (HR RHINO).
Product Name: Placa de Aislamiento Silicato de Calcio
Trade Name: HR RHINO Calcium Silicate Board
Product Codes: Density grades 220, 250, 270, 300, 400, 500, 800, 850, 980, 1020, 1200 kg/m³
High-temperature thermal insulation for industrial furnaces, cement kilns, power plant boilers, petrochemical equipment, molten aluminum contact applications, fire protection, and construction insulation.
Qingdao Henry Calcium Silicate Board New Materials Co., Ltd.
Room 407, Building 2, No. 41 Xingcheng Road, Licang District, Qingdao, Shandong Province, China
📧 [email protected]
📱 WhatsApp: +86 156 8913 8837
🌐 www.hrcalciumsilicateboard.com
+86 156 8913 8837 (Business hours, UTC+8)
None required for intact boards. CAUTION for airborne dust during cutting/machining.
None required for finished product. Dust exposure warnings apply during processing.
Calcium silicate boards are manufactured from natural inorganic raw materials with optional reinforcing fibers. The primary component is synthetic xonotlite crystal.
| Component | Número CAS | Concentration |
|---|---|---|
| Xonotlite (6CaO·6SiO₂·H₂O) | 1344-95-2 | 50-80% |
| Silica (SiO₂, amorphous) | 7631-86-9 | 15-30% |
| Calcium Oxide (CaO) | 1305-78-8 | 10-25% |
| Cellulose Fiber / Glass Fiber | 9004-34-6 / 65997-17-3 | 2-8% |
| Carbon Fiber (N-17 grade only) | 7440-44-0 | 0-3% |
Flush eyes immediately with plenty of clean water for at least 15 minutes, lifting upper and lower eyelids. Seek medical attention if irritation persists.
Wash affected area with soap and water. Remove contaminated clothing. If irritation develops, seek medical advice.
Move person to fresh air immediately. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Seek medical attention.
Rinse mouth with water. Do NOT induce vomiting. Give 1-2 glasses of water to dilute. Seek medical attention.
Suitable: Any type — water spray, foam, dry chemical, CO₂ (use to address surrounding fire conditions).
Unsuitable: None.
Product does not burn, does not support combustion, and does not emit toxic gases when exposed to high temperatures hasta its service limit.
Standard firefighter protective gear and self-contained breathing apparatus (SCBA) recommended for fire in the surrounding area.
Avoid generating and breathing dust. Wear appropriate PPE (dust mask, safety glasses, gloves). Ensure adequate ventilation.
Product is inert and non-hazardous to the environment. Prevent large quantities from entering drainage systems, but no specific environmental protection measures required.
| Component | OSHA PEL | ACGIH TLV |
|---|---|---|
| Total Dust (inert) | 15 mg/m³ | 10 mg/m³ |
| Respirable Dust | 5 mg/m³ | 3 mg/m³ |
Provide adequate ventilation. Use local exhaust when generating dust during cutting or grinding. Ensure dust collection systems are in good working order.
| Appearance | Rigid white/off-white board |
|---|---|
| Odor | Odorless |
| pH | 9–11 (aqueous suspension) |
| Density | 220–1200 kg/m³ (depending on grade) |
| Melting Point | >1200°C |
| Boiling Point | Not applicable |
| Flash Point | Not applicable (non-combustible) |
| Flammability | A1 No Combustible (EN 13501-1) |
| Solubility in Water | Insoluble (absorbs moisture) |
| Temp. Máx. Servicioerature | 1000°C – 1100°C (depending on grade) |
| Conductividad Térmica | 0.058–0.21 W/m·K (temperature dependent) |
Stable under normal conditions of use and storage.
Chemically stable. No polymerization or decomposition under recommended conditions.
Strong acids (hydrofluoric acid, concentrated sulfuric acid).
None at temperatures below the rated service limit. Above 1100°C, crystalline transformation may occur but no toxic gases are released.
Inhalation (dust), skin contact, eye contact.
Mild mechanical irritation possible from dust contact.
Dust may cause mechanical irritation.
No data available. Not expected to cause reproductive or developmental toxicity based on composition.
Inorganic, chemically inert material. No known ecotoxic effects.
Non-biodegradable. Material is essentially inert in the environment.
Not expected to bioaccumulate.
Immobile; essentially insoluble in water.
None known. Product is environmentally safe.
Not classified as hazardous waste under EPA (RCRA) or EU Waste Framework Directive (2008/98/EC). Can be disposed of as ordinary industrial/construction waste.
| UN Number | Not regulated |
|---|---|
| UN Proper Shipping Name | Not regulated |
| Transport Hazard Class | Not applicable |
| Packing Group | Not applicable |
| IMDG (Sea) | Not regulated |
| IATA (Air) | Not regulated |
| ADR/RID (Road/Rail) | Not regulated |
| Marine Pollutant | No |
Protect from moisture during transport. Secure cargo to prevent movement and breakage. Standard commercial packaging (wooden pallets with plastic film wrap) is sufficient.
GHS: Globally Harmonized System · OSHA: Occupational Safety and Health Administration · ACGIH: American Conference of Governmental Industrial Hygienists · TLV: Threshold Limit Value · PEL: Permissible Exposure Limit · PPE: Personal Protective Equipment · REACH: Registration, Evaluation, Authorization and Restriction of Chemicals
The information contained in this Safety Data Sheet is based on our current knowledge and is believed to be accurate as of the revision date. However, no warranty is expressed or implied regarding its accuracy, completeness, or suitability for any particular purpose. The user is responsible for determining the suitability of the product for their specific application and for complying with all applicable laws and regulations. HR RHINO assumes no liability for any injury, damage, or loss resulting from the use of this information or the product described.
— END OF SAFETY DATA SHEET —